Gen 3 Portals Are Geared for All
Everyone knows there’s no such thing as a “one size fits all” off-road
experience. It all comes down to where, when, and how you like to ride. That’s
why SuperATV’s Gen 3 portals are all about giving you options. When you buy our
6” Portal Gear Lift for your Honda Talon 1000X, you get a say in what kind of
housings we use (cast or billet aluminum) and how much gear reduction you get.
If you’re the kind of rider who likes to push your machine to its limits in
terms of power and tire size, a 45% gear reduction is right up your alley. If
you’re looking to increase your cornering abilities on the trail, go with a 30%
gear reduction. Either way, you can’t go wrong.
GDP—the Most Trusted Name in Portals
When you add a set of GDP portals to your machine, you’re joining thousands of
other riders who experience the strength and reliability of this product every
time they get behind the wheel. More side-by-side enthusiasts turn to SuperATV
for portals over any other brand, and there’s a reason for that. Our portals
are the most trusted, tested, and proven, hands down.
Perfect for Mud
Mud and portals go together like peanut butter and jelly. With GDP portals,
your 1000X has the room for bigger tires and the torque boost needed to run
them. You’ll be able to cut through the thickest, sloppiest mud with ease, and
the 6” lift will keep you from getting swamped. You’ll never approach mud the
same way again.
A Gear Reduction That Protects Your Drivetrain
By putting the gear reduction in the hub, our portals don’t put any extra
stress on your machine’s drivetrain. This means your axles, differential, prop
shaft, and transmission are able to do their job without acquiring any
premature wear and tear. Being able to ride without worry lets you focus on
what’s really important—having fun.
Learn more about how tire size and gear reduction can
unleash your machine’s potential.
Unmatched Gear Material
Your portals are only as strong as the gears inside of them, so we made ours as
smart and strong as humanly possible. These top-of-the-line gears are made
using 9310 alloy steel, which is insanely strong. We also precision grind them
to ensure that they mate perfectly with every revolution. Long story short,
these gears deliver a super smooth and quiet performance, no matter how you
Stronger Housings by Design
We went all out when designing our portal housings, because we know how
important it is for them to be stronger, smarter, and more reliable than
anything else out there. And what’s more, you get options—choose from cast or
USA-made, CNC-machined 6061 billet aluminum. Whichever you choose, you’re
getting housings that are second to none.
housings are reinforced in all the right places
built with better oil flow and gearing forces in mind
are no gimmicks and no vents because vents do more harm than good—we know
because we tested them
The Strongest Portal Backing Plates You Can Get
We make our portal backing plates using an advanced steel alloy that’s
specialized for ultra-high force applications, so you know it’s tough enough to
put up with your level of trail abuse. At 5/16” thick and with a metal that’s
even stronger than chromoly, these backing plates are guaranteed to perform for
years on end.
Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:
Thermo-Tork® gaskets with excellent oil resistance and a lower
deterioration rate than Kevlar gaskets
sealed input gear and double-lipped output seal
sealing coverage throughout so you can forget about oil leaks
Bearings That Rock
Your bearings can make or break your portals' performance. Just like everything
else that goes into GDP portals, our bearings are designed with expertise and care.
We use roller bearings to hold our idler gear because we don’t compromise when
it comes to strength. Our output bearing is a double-angular contact bearing,
which can handle huge loads in all directions without showing premature wear.
These bearings truly are built for battle.
Universal Hubs and Slotted Rotors
GDP portals come with precision-ground, stainless steel slotted rotors that
stay cool and give you the braking power you need, when you need it. Our
portals also come with universal hubs that have 4/156, 4/137, 4/115, and 4/110
bolt patterns and lugs. This means you’ll be able to run nearly any
side-by-side wheel under the sun! We also invented the tapered output shaft
that attaches to the hubs. It gives you a more secure lock that keeps your hubs
from wobbling or wearing over time.
Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated
team just for portal support. Give us a call so we can get the perfect set of
portals in your hands today.
6” Portal Gear Lift Includes:
(4) Assembled portal hub boxes complete with 9310 gears,
seals, output shaft, Thermo-Tork® gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel
slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates with spacers
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut
Honda Talon 1000X Portal Gear Reduction Recommendations
Suspension Setup with 6” Portals
6” Portal Gear Reduction
1.5" Forward Offset A-Arms
1.5" Forward Offset A-Arms and 2"
listed are general guidelines to maintain factory top speed. Installing
a larger than recommened gear reduction will result in extra torque and lower
top speed. Give us a call for more information.
? California Proposition 65 Warning ?
WARNING: This product may contain a chemical known to the State of
California to cause cancer or birth defects or other reproductive harm.
Talon 1000X : 2019+
Talon 1000X-4 : 2020+
with billet or cast aluminum housings
quiet, precision-ground gears made from 9310 alloy billet steel
in. diameter 4340 hardened steel driveshaft
use Thermo-Tork® gaskets that don’t let anything through
hub fits all major bolt patterns
reduction reduces stress on your drivetrain
224 lb. total, which is 25+ lb. lighter than the competition
- 18” or
larger wheel required
wheels cannot exceed 4-1/2” backspacing
and larger wheels cannot exceed 5” backspacing
Limited Lifetime Warranty
When filling gear box use only 80W-90 gear oil. Using grease will cause
failure of gears and bearings. Using grease will void your warranty.
SuperATV takes pride keeping your GDP Portal Gear Lift in working order.
That’s why we give you, the original purchaser, a lifetime of portal
protection contingent on the following conditions. SuperATV warrants this
product and its parts (excluding bearings, seals, & gaskets). Warranty is
limited to material and / or workmanship defect at the time of shipment from
the factory, and in no event shall seller have any liability for
consequential damages of any kind resulting from a breach of this warranty.
This warranty will be void on all products that show evidence of
misapplication, improper installation, abuse, lack of proper maintenance,
negligence, or alteration from original design. This warranty is in lieu of
any other warranties, either expressed or implied, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Procedures for obtaining warranty service:
Should you have any problems with your Gear Driven Performance product,
please call SuperATV Customer Service at 855-743-3427. Please have a copy of
your original purchase receipt available, with dealer name (if applicable),
date of purchase, and invoice number when calling for technical help. Most
often, installation, or break in procedural issues (See break in procedure
information, located in the instructions) can be handled quickly by speaking
with one of our customer service representatives.
If it is determined that repairs are required to your Gear Driven Performance
portal, you MUST acquire an RGA number from our customer service team. RGA's
and repair services are ONLY rendered by SuperATV. Any shipping costs
incurred after 30 days (starting from the original purchase date) on any
Portal returned for repair is the customer's responsibility. ALL Portals must
be returned in the original box, with the original packaging, or a similarly
well protected box. ALL portals must have the RGA number clearly written on
the outside of the package. NO COD packages will be accepted, and no package
will be accepted without an RGA number written on the outside of the box.
Shipping information, including address and method, will be given to you by
our customer service team and/or listed on our website when you create your
Upon arrival of your warranty parts we will have them inspected by our
technicians to determine if the damage was a manufacturing defect or
rider/installation error. The inspection usually takes place 1-2 days after
the package arrives. SuperATV will then call you with the results of the
inspection. Depending on the outcome of the inspection, you may be required
to pay a replacement fee for the broken parts (prices may vary depending on
parts that need to be replaced). We do our best to get your issues corrected
as soon as possible so you can get back out on the trails. We also match
shipping labels for our customers. If you ship the warranty parts to us with
an overnight label, we will return the favor and send you the replacements
parts on an overnight shipment at no charge.
Replacement bearings, seals and gaskets can be found at www.SuperATV.com.
Thank you for your business!
Instructions - PGH6-3-82 (2.43 MB)