Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.
Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.)
Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.
Features:
- 25% larger than average stock arms - Crafted from 1 1/4” DOM steel
- Up to 2.5x the wall thickness of an average stock arms
- Grease fittings included for most models
- Added ground clearance featuring bends that maximize clearance and axle protection
- Easy to install and maintain
- Limited Lifetime Warranty
Tire Fitment:
These arms allow you to run 31” tires without a lift.
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Must Read: This kit has 2 settings. Lifted and Non-Lifted.
If you have a lift on your unit, you need to remove the rear portion of the lift. There are 2 shock position settings on your rear raked control arms. One for lifted and one for non-lifted vehicles. You can not install our rear lift kit with our rear control arm kit.
Fits:
2016 Kawasaki Teryx 800 4 LE
2016 Kawasaki Teryx 800 4
2016 Kawasaki Teryx 800 LE
2016 Kawasaki Teryx 800
2012 Kawasaki Teryx 750 4
2013 Kawasaki Teryx 750 4
2014 Kawasaki Teryx 800 LE 4
2014 Kawasaki Teryx 800 4
2012 Kawasaki Teryx 750 4 EPS
2013 Kawasaki Teryx 750 4 EPS
2014 Kawasaki Teryx 800
2014 Kawasaki Teryx 800 LE
2015 Kawasaki Teryx 800
2015 Kawasaki Teryx 800 LE
2015 Kawasaki Teryx 800 4
2015 Kawasaki Teryx 800 4 LE
2017 Kawasaki Teryx 800 4 LE
2017 Kawasaki Teryx 800 4
2017 Kawasaki Teryx 800 LE
2017 Kawasaki Teryx 800
2018 Kawasaki Teryx 800 4 LE
2018 Kawasaki Teryx 800 4
2018 Kawasaki Teryx 800 LE
2018 Kawasaki Teryx 800
2019 Kawasaki Teryx 800 4 LE
2019 Kawasaki Teryx 800 LE
2019 Kawasaki Teryx 800 4
2019 Kawasaki Teryx 800
2020 Kawasaki Teryx 800
2020 Kawasaki Teryx 800 LE
2020 Kawasaki Teryx 800 4
2020 Kawasaki Teryx 800 4 LE
2021 Kawasaki Teryx
2021 Kawasaki Teryx Camo
2021 Kawasaki Teryx 4
2021 Kawasaki Teryx 4 LE
2021 Kawasaki Teryx 4 Camo
