Shopping Bag

0 item(s) in cart/ total: $0    view cart

Highlifter Lower (spherical bearing) Arched Radius Bar for Polaris RZR 1000 XP (12mm bolt size)

review
0
0
5
Your Price: $214.95
Free Shipping.
Part Number:2868

Choose Options

Powdercoat

HighLifter maximized the available space in the rear radius bar area with extreme curvatures to give you the most ground clearance AND still protect your axle with the Max Clearance Series Radius Bar. Notes: 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket. This kit does not fit units that have 10mm factory bolts!

A bent rear radius bar on your RZR XP 1000 will hinder your ground clearance and can quickly lead to a broken ride or getting stuck because you re hung in a rut or on a rock. High Lifter maximized the available space in the rear radius bar area with extreme curvatures to give you the most ground clearance AND still protect your axle with the Arched Radius Bar.

Made from 1 ¼ x 3/16 DOM steel tubing, the Max Clearance Series Radius Bar is a beefy addition compared to the OEM bars (3/4 ) and other competitors (1 ). The simple bolt-on kit also features a 5/8 heim joint with a load rated at 17,955 pounds and polyurethane bushings for rugged durability in the deepest ruts and along the rockiest terrain.
  
Notes:
  • 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket.
  • This kit does not fit units that have 10mm factory bolts!

Related Items

Recently Viewed Items