Honda Pioneer Winch Mount
Fits: 2014-18 Pioneer 700 and Pioneer 700-4 (if you have a Pioneer 1000, see P/N 13136)
If you are mounting your winch down below on our front bumper p/n 12493 then you will need this winch mount. If you are mounting it on top of our bumper you will not need this.
Accepts most winches up to 4000 lbs.Viper Elite 3500Viper Elite 4000WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0sWARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30WARN: RT40 / XT40WARN: Vantage 2000-4000lbWARN: Vantage 2000-4000lbWARN: ProVantage 2500-4500lbsATV2500 / ATV3000Terra25 / Terra35 / Terra 45 / LT2000 / LT2500 / LT3000MILE MARKER : PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500CYCLE COUNTRY : Work Power 1500 and 2500 / Powermax 2500 and 3500BADLAND : 2000lb #68146 - Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed EMP P/N: 10906) - Listed Models come with incorrect ATV Roller FairleadsBADLAND : 3000lb #68145 / 5000lb #68144CHAMPION : C10013 / C10014 / C10018 / 10020 / 10024 / 12053 / 12503 / 13501(reqires rollers) / 14061CHAMPION : 14501 / 14551 / 14552 / 40252 (4500lbs)CHAMPION : 10028 / 10032 / 12001 / 12002 / 13001 / 20049 / 20051 / 20249 / 30045 / 30145 - Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed EMP P/N: 10906) - Listed Models come with incorrect ATV Roller FairleadsCHAMPION: 14001 and 14061KEEPER CORP. TRAKKER : KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000CKEEPER CORP. TRAKKER : KT2000 - Requires purchase of a roller Fairlead (EMP P/N: 10906)SMITTYBILT : XRC 2.0 - Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed EMP P/N: 10906) - Listed Models come with incorrect ATV Roller FairleadsSMITTYBILT : XRC 3.0XGEAR: X3000 / X4000 - 4-Hole Standard (3.00" x 4.875" bolt pattern)VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series) - All with 3.00" x 4.875" Bolt Pattern mount-up - All with 3.00" x 6.600" Bolt Pattern mount-upPossibly Many others with the below standard Mounting patterns - 4-Hole (3.00" x 4.875" bolt pattern with Rollers that are 4.875" bolt pattern) - 4-Hole WIDE (3.00" x 6.60" bolt pattern with Rollers that are 6.600" or 6.000" bolt pattern) - 2-Hole (3.10" with Rollers that are 4.875" bolt pattern)